10L ACRYLIC PRIMER Water-Soluble Deep-Penetrating MultiSurface Interior Exterior

  
We invite you to read the listing description. Tapes, mats, corners & collars (55). For use indoor and outdoor. For use on concrete, brick, plaster, wood.

ACRYLIC PRIMER is a water-soluble acrylic primer intended for covering structural surfaces inside rooms, as well as those exposed to the destructive effects of weather conditions outside. Recommended for use under high quality latex paints, regular emulsion paints, acrylic paints, heavy vinyl and fiberglass wallpapers.

After drying, it forms a transparent layer. It can be used on various building materials, such as: plasters, concrete, bricks, gypsum, wood-based materials, plasterboards. Properly applied, it increases adhesion, unifies the absorption and cohesiveness of the substrate, while not hindering the process of the so-called. The surface to be primed should be thoroughly cleaned, loose paint chips removed and degreased. Fresh cement-lime plaster can be painted not earlier than 4 weeks after application.

Smooth surfaces should be sanded with sandpaper. Defects and cracks should be filled with acrylic putty, larger ones inside with gypsum, outside with cement mortar. Use undiluted, in special cases ACRYLIC PRIMER can be diluted with water in a ratio of 1:1, ie 1 part of the preparation to 1 part of water. Before painting, mix the contents of the package thoroughly.

Do not allow the formation of glosses and stains on the walls. In the event of contact with skin, wash with soap and water. Flush eyes with plenty of running water. In case of irritation symptoms, contact your doctor. Keep out of reach of children.

Paint with a roller, brush or spray. Use and store at temperatures not lower than +5 ° C and not higher than 35 ° C.

Drying time: about 1-2 hours. Recommended number of layers: 1, in specific cases, 2.

Yield: 6-10 m2 / l. Cleaning tools and dilution - water.