Bedec Multi Purpose Surface Paint No Primer/Undercoat Required White 2.5L

  

Bedec Multi-Purpose Surface Paint No Primer/Undercoat Required - White 2.5L. Bedec Multi Surface Paint (MSP) is a versatile, self-priming and self-undercoating interior and exterior paint for use on a wide variety of surfaces. Ideal as a decorative, protective coating for most building surfaces including concrete, brickwork, rendering, asbestos, bitumen, iron, aluminium, lead, zinc, copper, timber, slate, most plastics, fibreglass and cement fibre board. It's a water-based, microporous finish that is non-yellowing and has low VOC content. MSP is also suitable for weathered substrates such as creosote, bitumen, and galvanised and plastic-coated cladding.

No undercoat or primer needed. Class 0 fire rated, resists heat up to 8x. Sure that the surfaces to be painted are clean, dry and free from dust, dirt, grease and wax. Remove all loose and defective paint.

Remove algae and fungus and treat with a fungicidal wash. Lightly sand smooth glossy surfaces to provide a key. Bare steel should be free from rust, scale and dust before applying Bedec water-based All Metals Primer.

Pressure-treated timber should be weathered for at least six months before painting. E wood that has been left to the elements and has been degraded as a result - should be abraded to reveal new cells. New planed, finished wood or PSE wood should also be abraded to open the grain and allow maximum penetration.

On untreated weathered wood, new wood, cement, render, plaster, brickwork or any porous substrate, thin the first coat with approx. New creosote should be allowed 3 months to weather. You do not need to etch or prime galvanised steel. Allow new galvanised steel to weather for two months before painting. We recommend to perform a test patch prior to application to ensure you are happy with the adhesion and colour.

Stir thoroughly with a flat object. Do not apply when air or surface temperatures are below 8°C or when rain is likely before the paint has fully dried. Apply by brush, roller, conventional H. Apply 2-3 coats on sealed surfaces, allowing each coat to dry thoroughly. Note: Spraying can significantly reduce coverage, depending on the type of spray equipment used.

For airless spray systems for example coverage will be reduced to approximately 6-8 m2 per litre per coat. Primer required on mild steel. This item is in the category "Home, Furniture & DIY\DIY Materials\Paint, Stain & Varnish\Interior & Exterior Paint". The seller is "homecareessentialsstore" and is located in this country: GB. This item can be shipped to United Kingdom.

1. Container Size: 2.5 L
2. Application Method: Paint
3. Custom Bundle: No
4. MPN: K8965
5. Coverage: 33sq.m
6. Suitable For: Wood, Melamine, Plastics, Radiators, MDF, Lead
7. Colour: White
8. Brand: Bedec
9. Paint & Primer In One: No
10. Type: Interior/Exterior
11. Unit Type: L
12. Packaging: Can
13. Features: No Primer / Undercoat Required
14. Country/Region of Manufacture: United Kingdom
15. Unit Quantity: 2.5l
16. Finish: Soft Gloss
17. Room: Any Room
18. EAN: 5055006712605