Cattery and kennel floor paint, waterproof epoxy paint

  

Kennels and Catteries Water Based Epoxy Paint 1L, 2.5L & 5L. Our hard wearing, low odour Epoxy paint for Kennels and Catteries is easy to apply using a brush, roller or spray.

It is trusted by professionals and used in a range of commercial and domestic applications. Our water based epoxy paint is ideal for floors and walls in kennels and catteries where a waterproof, easy to clean surface is required. Can withstands mild chemical and spray cleaning. Price includes VAT at 20%. Ideal for kennels and catteries where a clean, waterproof, easy to clean surface is required. Can withstand mild chemical and spray cleaning. Can be used on walls and floors. A water based epoxy coating suitable for all applications where concrete or masonry requires protection or waterproofing. Touch Dry - 4-6 hours. Initial Cure - 24 Hours.

Full Cure 5 - 7 days dependent upon temperature. A two part product which when mixed gives 1 litre, 2.5 litres or 5 litres.

1 litre will cover approximately between 5-6 metres. Shelf life of 12 months. Tools used can be cleaned in cold water provided product has not been allowed to dry. Store in a sealed container between +5°C and +30°C.

Protect from frost and direct sunlight. Surfaces to be coated must be clean, dry and free from all dust and loose flaking materials and all oil and grease must be removed. Hard, smooth chemically treated floors must be etched or mechanically abraded prior to application to ensure a sound key.

New concrete must be fully through-dry i. Allow 1 month per inch of concrete laid.

A two part product-empty the entire contents of Pack B into Pack A and mix together thoroughly until a uniform colour is obtained without streaks. Mix either by use of a slow speed drill, paddle or by hand. If by hand wear protective gloves and keep damp. The second coat should be applied as soon as the first is touch dry. It is important to apply the second coat within this time frame to ensure a good chemical bond between coats.

Slip resistance can be obtained by adding a fine or medium grade ant-slip aggregate, scattered over the first wet coat. Allow to dry, brush away loose particles then apply second coat of paint. For further information and advice please contact ASK Coatings technical department and the Safety data sheet available on request. All product images and colour representations used are for illustrative purposes.

Search for Ask Coatings online and then contact our friendly customer services team. This item is in the category "Business, Office & Industrial\Building Materials & Supplies\Industrial Paint, Coatings & Supplies\Industrial Paints". The seller is "ask-coatings" and is located in this country: GB. This item can be shipped to United Kingdom.

1. Size of container: 5L
2. Colour: Mid Grey
3. Features: Waterproof, Low Odor, Moisture Resistant, For Outdoor Use, For Interior, For Commercial Use, For Residential Use, No Odor, Mould Resistant, Scrubbable, Washable
4. MPN: KCEPOXY
5. Paint & Primer In One: Yes
6. Protection Properties: Algae Resistant, Dirt Resistant, Moisture Resistant, Mould/Mildew Resistant, Splatter Resistant
7. Unit Type: L
8. Suitable For: Flooring, Brick, Concrete, Porch & Floor, Plaster, Wood
9. Country/Region of Manufacture: United Kingdom
10. Application Method: Paint
11. Packaging: Can
12. Unit Quantity: 1
13. Brand: Ask Coatings
14. Room: Any Room, Basement, Garage
15. Type: Epoxy Paint