Such as warehouses, factories, workshops, garages and showrooms. Available as two components which when mixed together make 5 Litres. Available in 12 decorative standard colours & 100's of option Colours.
(Please see colour chart below). Touch dry in 4 hours, hard dry in 16 hours, minimum overcoating interval 16 hours, maximum overcoating interval 72 hours, at temperature of 20°C.Once applied allow 7-10 days to fully cure before allowing traffic. Coverage = 8 square meters per litre. Apply by brush or short pile roller. Before application it is important to make sure that all areas are clean, sound, dry and free from surface contamination.
All oils/ grease/laitance should be removed with our Acid Etch Floor Cleaning Solution. Care should be taken on previously painted floors to make sure that the original coatings are sound, as the epoxy will'tighten-up' during curing, exposing areas of the original floor coating which have poor adhesion.Mechanically abrading all areas is recommended to reduce this risk. We will always go out of our way to source the product you are looking for. Our mission is simple: -' to be our customers first choice. For technical help & advice, please call 0845 838 2225. Please always check the contents of your order prior to signing.
No claim for damage will be accepted once signed for with our couriers. Head Office & Distribution Centre. The Glade Business Centre Eastern Avenue West Thurrock Essex RM20 3FH Tel : 0845 838 2225. This item is in the category "Business, Office & Industrial\Building Materials & Supplies\Industrial Paint, Coatings & Supplies\Industrial Paints". The seller is "paints4trade" and is located in this country: GB. This item can be shipped to United Kingdom.