Everbuild Heat Resistant PAINT is a protective and decorative paint which is heat stable for temperatures up to 600°C. It is suitable for use on domestic stoves, furnace chimneys, industrial ovens and exhausts. It can be used as a single coat, or two coats on bare ferrous metal surfaces. Temperature resistant up to 600. Works on most common mineral/metal surfaces.Ensure all surfaces are free from all loose dust and contaminants i. Rust, soot, grease, dust etc. Allow stove to cool before application and switch off pilot lights if applicable. Test on previously painted surface for compatibility. Apply with bristle paint brush. Drying time; Surface dry 15 minutes. Dry to handle 1 hour. The paint surface if air dried will become fully cured after the painted article has been heated up for the first time. Care must be taken with the paint film until this has occurred. Consult MSDS for full list of hazards. Tin - Keep away from heat, sparks and open flame. Take precautionary measures against static discharges. Store in tightly closed original container in a dry and cool place. This item is in the category "Home, Furniture & DIY\DIY Materials\Paint, Stain & Varnish\Interior & Exterior Paint".
The seller is "b4rgain54u" and is located in this country: GB. This item can be shipped to United Kingdom.