Especially suited for areas that need low odour or quick-drying paints such as food preparation areas or places that need a now downtime application. Also ideal for garages, kitchens, workshops, industrial areas and agricultural areas. Made in England with Premium Alkyd Resins.Ensure all surfaces are sound and clean, free from dust and flaking paint. Ensure surface is completely dry and free from condensation and damp. Remove any loose or flaking paint. If bare concrete is being painted it is advised a base coat of Everest Trade Quick Drying Floor Primer and Sealer. Is used to get the best results as the primer will provide a penetrating base coat for the topcoat to anchor to. Can be easily applied by brush, roller or airless sprayer to all concrete floors, polished or power floated will need to be etched / scarified prior to application to minimise the chance of delamination. His paint cannot be applied over oil/solvent based paints, it may react. Can be used on standard concrete. And wood as well as most other porous substrates. Light Grey, Grey, Dark Grey, Black, White, Magnolia, Classic Cream, Bright Red, Brick Red, Black, Yellow, Blue and Green.
As well as all standard RAL and BS colours for orders of 100 litres and over. Approximately 6 - 8 square metres per litre.Under normal circumstances, it should be touch dry in 2 - 4 hours if well ventilated and conditions are dry. Add 1 hour to drying times of anti-slip variant. Mix thoroughly before use with a paddle mixer drill attachment.
Make sure the surface is 100% dry and free from any moisture or contaminants before application. Store away from heat and flames. Secure lid between uses to prevent paint hardening. Can be let down with water if needed.We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference. This is fine if you are planning on using the different batches on different coats, However, it's not recommended to use on the same coat. One Part / Single Pack. Alkyd Resin Dispursed in Water-Based Solvent. Wide Range of Stock Colours.
Tintable to Most RAL and BS Colours. Apply By Brush, Roller, Conventional H. Approximately 6 - 8 Square Metres Per Litre Per Coat.
2 - 4 Hours at 18°C. Clean up with warm soapy water. Available in 5 and 20 Litre Variants.