GARAGE FLOOR PAINT - CONCRETE FLOOR PAINT - FACTORY FLOOR PAINT - PAINTMAX PROFESSINAL PU350. AQUA-MAX ACRYLIC PROFESSIONAL FLOOR PAINT. R Heavy Industrial Surfaces-Maximum surface protection, 2 Hour Quick Dry.HEAVY INDUSTRIAL PU350 PROFESSIONAL POLYURETHANE FLOOR PAINT. Designed for Heavy Industrial Surfaces. NDUSTRIAL PU150 POLYURETHANE FLOOR PAINT.
Designed for light Industrial Surfaces. Nothing transforms a surface like a new coat of paint. Polyurethane Floor Paints are single Pack, so no product mixing, or Adding hardener.
Quick and simple to use, giving a clean, safe, durable surface. We're here to take the fuss out of it - no task is too big or too small! Just get in touch today to find out more about our products.We've got you covered. Full product range including further colour range at. AQUA-MAX ACRYLIC PROFESSIONAL MULTI-SURFACE PAINT. Heavy Duty 2 Hour Quick Dry, Multi-Surface Water Acrylic based coating. Aqua-Max is a low odour, 2-hour quick dry, Acrylic based multi surface, Concrete, Wood and Metal coating that has been designed for Heavy Duty, High Impact Industrial and domestic concrete, Timber and metal floor areas including power floated concrete. (After abrading and/or Acid etch preparation). Safe for commercial kitchen and food prep areas. Ready to use, single pack No hardener or mixing products required. Super quick 2-hour dry time. Apply very quickly & simply with roller, brush or spray. Sealer & Top Coat in One. Excellent resistance to oil, solvent spills.
Interior & Exterior surface coverage. 20 Litre tub will cover 80 plus SQ meters.Professional PU350 Polyurethane Oil Based Paints. Heavy-Duty 24-hour dry, Professional grade PU350 Oil based coating. Professional PU350 Professional Quality Polyurethane Oil based surface paints is our most durable PU Oil Based product. PaintMaxPro Floor Paint will cover interior & exterior concrete Flooring, Not suitable for power floated concrete. Made for high impact, heavy Industrial traffic Flooring areas.
Ideal for surfaces where heavy Farm Machinery/HGV's operate, work units, Factory floors, Car Show rooms, Home Garages and all concrete floors and walls/surfaces that are open to the elements. Formulated to last using PU350 Polyurethane.
This product will withstand the test of time. We have designed this product to work under the pressures of Heavy Industrial Vehicles, Jet Washing and Surface Water, Grease and Oil residue, Continuous Footfall, All Weather Conditions both on Interior and Exterior Surfaces. High Impact Polyurethane PU350 Paint. Apply quickly & simply with roller, brush or spray.20 Litre tub will cover 60 to 80 SQ meters. Standard PU150 Polyurethane Oil Based Paints. PaintMax PU150 Floor Paint is our cost-effective surface coating solution, it will cover interior concrete Flooring/surfaces. Made for lower impact, low traffic Industrial Floor areas. Ideal for domestic work units, light industry Factory, Car Show room, Home Garages.
Not suitable for power floated concrete. This product has been designed for home, domestic, light indusial usage on interior surfaces only. All Stock is new and unopened. This product is ready to use, single pack, No Mixing or Hardener products required.
(Areas covered: London, Kent, Essex, Hertfordshire, South East) PLEASE CONTACT BEFORE PURCHASING 0203 589 2280. COLLECTION AVAILABLE FROM EPPING CM16 or BROMLEY BR1 or HALSTEAD CO9. Bulk orders, Trade and Pallet price (45x20L) available please contact for discount price.
The information set out in this section below should be used as a guide, results can vary depending on age, condition of surface and previous coatings that have been applied. Weather conditions and ventilation may also play a part in drying times. Mix very well before use, using a drill/paddle tool. We advise a test area (1 meter square) before applying product to complete surface. This is to test that product bonds to surface, the colour is correct and to check for contamination.Where the floors have been subjected to oil and grease, we recommend steam cleaning or jet washing your surface and use our Heavy-Duty Surface Deep Clean before application of any floor coating after allowing the surface to dry and PaintMax Pre Seal has been used. A floor coating does not do well if you have any moisture issues Hydrostatic pressure from the moisture can actually cause the coating to peel up, sometimes taking pieces of the concrete with it. Should floors be devoid of an effective Damp Proof Membrane (DPM), virtually any paint will lift and peel off the surface. Indeed, even self-levelling screeds can be pushed up by water pressure.
This is another nightmare regularly experienced by many companies. For this reason, a damp proof coating is recommended as a solution before applying a floor paint. Treating your floor/surface before coating them. It is important to'treat' your surfaces before coating them to prevent issues post-paint. Before painting your floor or surface, it is important to repair any cracks, holes or expansions of joints in your concrete to prevent an un-slightly finish to your flooring once it's painted.
PaintMax Pre Seal is designed to seal the surface from the out-gassing of the concrete, where air will rise and be expelled from the concrete which is often caused by a rise in temperature or a change in humidity. Another major cause to poor flooring is rising damp. Due to a poor or non-existent DPM (Damp Proof Membrane), the damp is caused by a rising water table and/or the immediate surrounding areas being waterlogged. Air entrapment is a common issue that can occur if the surface isn't primed before being coated.This is where the air pushes bubbles into the resin coat which later bursts, leaving'craters' and'pin holes' in your floor paint. This can also be caused when the resin has been mixed too quickly - it is important to use the correct tools to mix to avoid issues. Primer tackles this issue by soaking further into the surface to fully seal the entire surface area of concrete floors. Air is then less likely to push up, and on the rare occasion that it does, the bubble will pop and the resin now being thinner, will generally revert back and refill the'pin hole' caused by the bubble.
60/80m squared per 20 litres Tub. Depending on application surface age and conditions. Dry time of coating using standard roller in areas with minimal air moisture (lab conditions). First coat should be left to dry for 24 hours to assure adhesion to surface leave minimum of 24 hours for after coats always leaving minimum of 48 hours before 100% use of area again. True 100% cure will only be 7 days after application of last coating.(Work in a well-ventilated area using no forms of naked light/fire). Please test for damp before coating by applying a small test patch or applying a clear plastic sheet (30cmx30cm) and sealing it to the floor with a high-grade tape (duct tape) without any ways of air escaping and leave for 24 hours if there are any forms of water vapour on the sheet then a potential damp issue may be present and steps will need to be taken before coatings. Mix very well before use using a drill/paddle tool. If the area you are looking to coat is virgin (never been coated) or has had contamination from oil, grease, cutting agents etc, Cleaning with correct equipment/surface preparation products will be required.
Power floated/Screed areas (smooth shinny concrete) will need to be treated with an acid etch or abrade by mechanical means all product info will be displayed on the item you will take collection of. A test patch is always advised as some areas my still have contamination and this could have complications when coating. The product Can/Tub/packaging may vary from listing picture due to stock levels and availability; Product contents will be as described in listing. PRE-SEAL ITEM IS An UNDERCOAT/SURFACE SEAL AND SHOULD ALWAYS BE OVER COATED WITH A FLOOR PAINT PRODUCT THE PRE-SEAL PRODUCT ON ITS OWN WILL NOT ACT AS A STABLE FLOOR COATING, PRE-SEAL IS COLOURED BLUE BUT WILL NOT SHOW ONCE COATED WITH TOP COAT.
Floor-paint Products are polyurethane heavy duty high impact formulation and care should be taken when applied full safety data sheet can be requested. All images are for illustration purposes only including main images shade difference may happen from image to product. Any recommendations and advice offered are given without legal responsibility. PaintMax shall not be liable to any person for any loss or damage which may arise from advice given or from the use of any of the information contained in any of the materials offered on this website.
Ideal for interior or exterior use. High impact durable polyurethane paints for concrete floors, walls, wood and metal products.
Collection from Epping CM16 Bromley BR1 or Halstead CO9. Same day and Next day. Please contact before purchasing to arrange, call: 0203 589 2280. CALL: 0203 589 2280 Full Product range avalible at.
This item is in the category "Home, Furniture & DIY\DIY Materials\Paint, Stain & Varnish\Interior & Exterior Paint". The seller is "paintmax_shop" and is located in this country: GB. This item can be shipped to United Kingdom.