Matt Red Brick and Tile Masonry Stone Paint Quick Dry Rustins Weather Resistant

  
Matt Red Brick and Tile Masonry Stone Paint Quick Dry Rustins Weather Resistant. Rustins Brick and Tile Red Paint is specially formulated on high quality alkyd resins and micronized pigments. Bonds exceptionally well to brick and tile, producing a durable and weather resistant matt finish. Interior and exterior for a range of masonry applications such as walls, cement, stone, tiles and bricks. Sizes: 100ml Sample, 250ml, 500ml, 1 Litre, 2.5 Litre and 5 Litre.

How to use Rustins Brick and Tile Paint. Preparation: The bricks should be free from dust and contaminants. Brush the bricks with a wire brush to remove any existing finish, which may be flaking and to remove any loose particles and mortar. Fill cracks and repair damaged pointing.

If the brickwork shows signs of efflorescence (white crystals on the surface), it must be removed by brushing or scraping. A coat of Alkali-resisting Primer must then be applied and allowed to dry before applying Rustins Quick Dry Brick and Tile Paint.

No primer is required if fresh mortar has been applied to the pointing and if painting new brickwork. If applying to existing painted brick test for compatibility as if not compatible it may flake off or dry to a glossy finish. Application: Use a large brush and apply evenly.

Apply paint liberally, making sure the surface is covered completely. Coats: 1 coat is usually sufficient. A second coat may be applied if required. Drying Time: Approximately 30 minutes, depending on temperature and humidity. Re-coating Time : Approximately 4 hours Application Temp: Ideally 15-25°C.

Do not apply if rain imminent. Coverage: 14m² per litre 1 coat. Maintenance: The surface may be washed with a mild detergent solution and a scrubbing brush and re-coated if necessary. Compatibility: May be applied over other paints but test for compatibility as the paint may dry glossy. Unsuitable for use over glazed tiles.

Settlement: STIR VERY WELL BEFORE AND DURING USE, or the product may dry with a satin or gloss finish. Shelf-life/Storage: Many years if stored in original tightly closed container in normal conditions. Hazards: Keep out of reach of children.

Avoid contact with skin and eyes. After contact with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser. A full Safety Data Sheet is available upon request. Clean-Up: Remove excess product from brushes before cleaning. Clean brushes whilst wet with water.

Hard brushes can be cleaned with Rustin's Brush Restorer. Listing and template services provided by inkFrog.