Ronseal 2.5L Outdoor Garden Paint Exterior Wood, Metal, Brick, Shed & Fence

  
Ronseal Outdoor Garden Paint - For Exterior Wood Metal Stone Brick - All Colours. Choose colour from drop-down list.

Add colour to almost anything in your garden with Ronseal Garden Paint. It's versatile and can be used to paint wood, brick, terracotta and metal.

The paint both looks good and will waterproof and protect your wood too. Add colour to your garden. Colour lasts up to five years.

Ronseal Garden Paint adds colour and interest to just about anything in your garden. Whatever you decide to paint, whether it is Wood, Metal, Brick, Stone or Terracotta, it will be transformed and be protected from the weather.

Ronseal Garden Paint replaces the popular Ronseal Woodland Colours, but the improved long lasting formula enables it to be equally as good when used to paint your courtyard brick wall as it is to brighten up your shed, fence or garden furniture. Not suitable for use on Decking, use Ronseal Decking Paint, Decking Stain or Decking Oil. Shed and Fence : Use a stiff brush or broom to remove and dirt or debris, then you are ready to go. If your panels are discoloured with green algae, first use a fungicidal wash such as Ronseal Decking Cleaner, rinse with clean water and allow to dry 24 hours before painting. Garden Furniture : Lightly sand any previous painted surface or bare wood to remove any rough splinters, then wipe over with White Spirits to remove any dust, dirt or grease.

Brick, Stone or Terracotta Preparation : Use a stiff brush or broom to remove and dirt or debris, then you are ready to go. Metal Preparation : Remove any rust or loose paint with a stiff wire brush, then wipe over with White Spirits. To ensure the paint lasts as long as possible, first apply a coat of suitable Metal Primer before using Ronseal Garden Paint. Application : After giving the paint a good stir, apply with a good quality brush such as Ronseal Shed and Fence Brush or Mako Acer brush (in the direction of the grain when painting wood).

Three coats are required to give the best even colour and protection, leaving four hours between coats. Coverage : 10-12 SqMtrs/ litre/ coat on wood, other surface may be less. Therefore: 750ml/ 3 coats = 3 SqMtrs or 2.5 litre/ 3 coats = 10 SqMtrs. Drying time : 4 hours between coats. Clean up : Warm Soapy Water.

Please Note some Tins Might have Dents or a few Spillages but we send out Sealed Brand-New Item. NOTE: THERE ARE DIFFERENT ITEMS AVAILABLE. WE WILL SEND ONLY THE ITEM SPECIFIED, WHICH YOU WILL CHOOSE FROM THE DROP-DOWN MENU. PICTURES ARE FOR ILLUSTRATION PURPOSES ONLY, OR TO SHOW THE AVAILABLE OPTIONS.

WE WILL NOT SEND ALL ITEMS/QUANTITY/SIZES (AS SHOWN IN THE PICTURES) UNLESS YOU CHOSE THEM. Are from reputable companies and are genuine products. Images are for illustration purposes only as the packaging may slightly vary.

All products will be inspected to ensure they are in a Re - saleable condition.