As rust prevention or waterproofing. For outside and inside use. Diluted with 25% water as an adhesion primer coat on slightly or non porous substrates such as glass, smooth bricks and concrete, ceramics, tiles, etc.
Please refer to the product Data Sheet for more uses. Further Details and Technical Data. Apply the usual de-rusting procedures min.Sa 2 sand blasting, min. St 2 steel brush, etc. Or by high-pressure water min. Dedust well after sand blasting. Conditions: Temperature between 8 and 55°C / Air humidity max.
The substrate temperature must be at least 5°C above dewpoint. Airless Spray: Nozzle: 11 - 13 / Pressure: 220 bars.
Diluted with maximum 3% volume of water. Theoretical consumption: 2 coats of minimum 200 g/m² (5 m²/kg). Do not apply in full sun or too hot conditions, to avoid a decreased flow. The product can remain a little sticky if it is used on new Plastisol cladding.Dry to handle: 2 hours. Dry to recoat: 6 hours.
Gloss level at 60º: 20%. Corrosion Class: C4 high protection. Solids Content in weight: 58%. Solids content in volume: 48%.