Brick Outdoor Wood

Zinsser BIN Aqua Primer Sealer Stain Killer Paint White


Zinsser BIN Aqua Primer Sealer Stain Killer Paint White

Zinsser BIN Aqua Primer Sealer Stain Killer Paint White    Zinsser BIN Aqua Primer Sealer Stain Killer Paint White
Zinsser BIN Aqua Primer Sealer - Stain Killer Paint - White. White pigmented water-based primer-sealer Excellent stain blocker Seals tannin, knots and sap streaks Seals cigar, cigarette & nicotine odours Seals severe water stains, fire & smoke damage Seals rust stains, graffiti, crayon, lipstick and grease DESCRIPTION B-I-N® Aqua is a high-performance white-pigmented low-odour water-based, synthetic shellac-based knot block primer and sealer that combines fast drying times with unrivalled adhesion and best possible coverage. RECOMMENDED USE Priming Interiors - Use as a full-surface primer on wood panels, building boards, doors, frames, PVC, plywood, concrete, glossy paint and varnish and other paintable surfaces. Spot-Priming - B-I-N® Aqua is excellent for exterior spot priming of knots, resin, rust stains etc. B-I-N® Aqua is also ideal for interior spot priming of water stains and puttied surfaces. Note that the primer on spot-primed areas with a porous surface may show through if the topcoat has bad coverage. This also applies to many ceiling paints and shiny enamels - only use a topcoat with good coverage. Sealing - B-I-N® Aqua penetrates and seals porous surfaces and dries to a smooth finish with excellent hiding properties. The paint gets better coverage and a more uniform shine, which makes B-I-N® Aqua an excellent primer for enamel. Ideal for wood, newcured plaster, concrete and concrete block, stucco, drywall, joint compound, uncoated wallcovering, and other porous surfaces. Stain & Odour Blocking - B-I-N® Aquawill effectively block stains from water, nicotine, grease, oil, soot, rust, mildew, tannin, crayon and lipstick. B-I-N® Aqua is also an outstanding odour barrier and blocks all kinds of odour, including odour from fire damage, smoke, cigars & cigarettes, mildew, pet urine, odour from fireplaces and heaters. Fire Damage - Replace severely charred substrates and remove loose soot and other contaminants with dry chemical sponge or duster. Prime damaged surfaces with B-I-N® Aqua to block smoke stains, water stains, and seal odours. Knots & Sap Streaks - Seal knots and resin with one or two coats of B-I-N® Aqua. If the wood is new, two coats are recommended. Glossy Surfaces - Glossy enamel paint and clear finishes, cabinets, panelling, glass, Formica®, MDF, ceramic tile and metal can be primed without sanding or deglossing. TECHNICAL DATA Density (g/cm³): 1.29 Gloss Level: Matt Solids Content in weight: 51.2% Solids content in volume: 36.9% DRY TIMES BY 20º C/RH 50% Touch dry: 25 minutes Dry to recoat: 45 minutes Fully cured: 7 days RECOMMENDED WET FILM THICKNESS 100-137 µm RECOMMENDED DRY FILM THICKNESS 37.5-50 µm THEORETICAL CONSUMPTION 7.5-10 m²/L/coat PRACTICAL CONSUMPTION Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application. SURFACE PREPARATION Surfaces should be clean, dry, sound and free of dust, dirt, excessive chalky material, grime, grease, oil, wax, mildew, wallpaper, adhesive or any contamination that may interfere with adhesion. If unsure, wash surface with an appropriate cleaning solution or solvent and rinse. Any Questions Please Contact Our Customer Service Team.
Zinsser BIN Aqua Primer Sealer Stain Killer Paint White    Zinsser BIN Aqua Primer Sealer Stain Killer Paint White